We produce a wide range of Hardfacing welding wires and electrods for special applications including the unique tubular hardfacing wires and stick rods.
Hardfacing can be deposited by various welding methods: Shielded metal arc welding. Gas metal arc welding, including both gas-shielded and open arc welding.
Suitable for a wide range of applications including the surfacing of post hole augers, agricultural points, shares and tynes, grader and cultivator blades, etc.
HBW-100XS-O is a chromium carbide cast iron flux cored wire for open arc welding, which has good wear resistance.
It can be welded on the surface of carbon steel, low alloy steel, manganese steel and cast iron. It is suitable for wear resistance under medium and low...Contact Now
Our HBW-14M-O hardface welding wire is austenite organization,especially suit for the situation of heavy impact and middle abrasion,such as repair workpieces of 14% manganese steel.Contact Now
Our HBW-34-O hardface welding wire is for build-up or hardfacing on worn workpieces,the hardness of the deposited metal which can be machined by carbide tools,it is designed for hardfacing or build-up or repair of
tractor roll,shaft,mine car wheel,gear and workpieces which...Contact Now
Our HBW-45N-O welding wire is for hardfacing with Ni and supper low carbon,to avoid defect and spot corrosion caused by Cr13 martensite under high temperature,it offers good wearability and thermal fatigue resistance and can be used in surfacing repairing of continuos caster...Contact Now
HBW-56-O hardface welding wire has excellent wearability and medium impact resistance,the appearance of postweld weld is layer of repairing welding are no more than two layers.Contact Now
Hardface weld metal is primary carbide and eutectic structure,it offers high hardness and excellent abrasion resistence.
No more than two layers of repairing welding is preferred,it鈥檚 applicable in
Wear coal wheels and roller,
Cement mixer,
Cutting knife of mud...Contact Now
Hardfacing welding electrode HB-E10-UM-60G is a basic coated electrode that is highly resistant to abrasion wear caused by coarse hard minerals. It has a highly concentrated chromium carbide in its structureContact Now
Hardfacing welding electrode HB-E7-UM-200 s a basic coated electrode. It gives an austenitic Hadfield Manganese steel type weld metal with 13 % Mn content. 3 % Ni content increases the ductility and impact properties. Soft weld metal has a low resistance to abrasion after the...Contact Now
Hardfacing welding electrode HB-E6-UM-60 is a general purpose, rutile coated hardfacing electrode especially designed to use with small transformers having a relatively low open circuit voltage. It is resistant to softening up to 500掳C. It gives a high abrasion resistant...Contact Now
Hardfacing welding electrode HB-E5-UM-45 聽is a rutile coated electrode. It gives a corrosion and wear resistant ferritic-martensitic stainless steel weld metal. It is used in hardfacing applications where a hardness of 42-46 HRC is required. The weld metal is resistant to...Contact Now
Hardfacing welding electrode HB-E4-UM-60 is a basic coated electrode. It gives a Mo alloyed, high speed steel type weld metal. Deposited metal retains its toughness properties at high temperatures enabling the formation of high strength welds, particularly during the...Contact Now
Hardfacing welding electrode HB-E2-UM-60 is a basic coated electrode. It gives a high oxidation resistant (up to 850掳C) weld metal that also have a high wear resistance. It is resistant to wears of medium abrasions at high temperatures.Contact Now
We're known as one of the most professional hardfacing welding wires & rods manufacturers and suppliers in China. Please be free to buy high quality hardfacing welding wires & rods made in China here from our factory.